What Roofing Work in Brentwood Includes
Work starts with a roof inspection, and that means more than a photo from the driveway.
A proper walk covers the field, the valleys, every penetration, and the attic underside.
The roofer checks decking, rafter condition, and existing ventilation before any roof estimate is written.
Tear-off comes next on most reroofs. Crews strip shingle to the roof deck, pry out old fasteners, and inspect sheathing for soft spots.
A dumpster sits on site for debris, and the crew protects landscaping and gutters before work begins.
Underlayment selection matters in Brentwood's climate. Synthetic underlayment replaces felt or tar paper on most pitched roofs.
Ice-and-water shield runs along eaves and valleys as a waterproofing backup, even though ice dam risk is low here. Winter rain still drives sideways under edges.
Material scope follows the roof type:
Installation covers the details that fail first. Crews set new pipe flashing and vent boot seals, rebuild chimney flashing, and install drip edge and ridge cap.
Ridge vent and soffit vent balance ventilation. Nail gun and air compressor work fast, but fastener placement and depth decide whether shingles hold in wind.
Cleanup is part of the scope. A magnet sweep clears stray nails, and crews haul off old underlayment, torn shingle, and debris.
A final walk checks gutter flow and downspout drainage before sign-off.
- Deck and substrate review: sheathing, plywood or OSB, truss and rafter condition
- Flashing survey: step flashing, counter-flashing, chimney flashing, pipe boot condition
- Edge check: drip edge, eave, fascia, rake, and gutter attachment
- Attic review: insulation depth, soffit vent intake, ridge vent exhaust
- Asphalt shingle: architectural shingle as the standard, three-tab shingle on budget or HOA-matched work
- Tile: clay tile and concrete tile reset or replaced over new underlayment
- Metal: standing-seam panel and corrugated panel on ag-adjacent and modern homes
- Low-slope: TPO, EPDM, PVC membrane, modified bitumen, or built-up roof
- Specialty: wood shake and cedar shake restoration, slate repair on older homes